I joined the St Louis Express in Houston at the Barbours Cut Container Terminal. I got there around 1030 at night after driving around looking for the ship for a while. The ship didn’t get in til 1900 and they told me to get there soon after.
I was excited to join my first container ship, so tried to get there soon after 7, but as usual things got in the way. Turns out, I really shouldn’t have showed up ’til morning anyway. I had to find a spare room to spend the night in, then move in the morning when the guy I was relieving got with me.
So, first thing we did was get me checked out in the crane. I’ve run cranes before and do fine with them. These cranes are way up off the deck. I’ve tried to count the rungs on the (straight) ladders, but keep losing count. We have 4 large cranes onboard. The climbing up and down has been killing me! I hate to admit it, but I may not be able to handle this job for another month if it consists of so much up and down climbing. 🙁
I haven’t even been here a week yet and I’m already worn out! I really didn’t know what I was getting myself into by signing on as a dayworker. “AB Maintenance”. On the other ships I’ve worked on, they just did the usual maintenance work. The big difference here is the cranes. I’m really concerned about my ability to do that part of the job. I hate to be a crybaby or a quitter, but I really can’t afford to take any chances. Especially now, when I’ve been out of work for so long. It’s already been over 27 months with just a few little 1-2 week temp jobs every few months to keep me going. I can’t afford to get hurt.
Other than crane ops, I’ve been doing a lot of greasing. I have my little green bucket filled with rags, grease gun, screwdriver, pipe wrench, WD-40, and crescent wrench. I carry it around in the mornings from 08-10 and work on greasing and exercising all the movable parts on board. So far, I have only got the aft mooring winches and roller chocks done since I usually only do that work from 08-10.
After the morning break, the Bosun (the boss of the deck crew) has had me chipping with the AB on the catwalks. We take off the gratings and crawl around underneath and get as much rust off as we can with the needle guns and air chisels. After coffee in the afternoon, we clean up the mess and the OS paints everything with corroseal. Next we prime it, then paint. It’s a big project, but gives everyone a chance to get overtime.
We left Houston 2200 Sunday (night). The weather was cool and the seas were calm. We had a nice ride across the Gulf of Mexico. I was hoping to see the Florida Keys when we passed but they were too far away.
We got to Savannah this morning around 0900. It took a few hours to run up the river and dock. We spent the night at anchor due to fog and the weather was still pretty grey and misty. We were all fast by 1130.
First thing we had to do was to move all our cranes out of their cradles and hang them over the offshore side. If not, they’ll interfere with the dockside cranes loading the containers onboard. Same with the pilot ladder (it’s attached to an accommodation ladder).
After lunch, it was back up in the crane. This time in crane #4 to load some crates into the engine room. They have a large hatch right behind the accommodations. It opens up right over the engines. It’s pretty cool to see all that machinery. My first day, I was in the crane and we had to change out a part for the engine. Someone mentioned it cost about a half million dollars. I’m glad they told me afterward!
So far, the sailing board is still set for midnight tonight. We’ll be off to Norfolk and then after that, on across the ‘pond’.
I’ll post more later. My new smart phone and it’s ‘mobile hotspot’ seems to be working OK so far, but we still have to be in cel phone range for me to use it. As soon as we left Galveston, we lost signal and only got it back on arrival this morning.